{"product_id":"radial-sw4-switcher-new","title":"Radial SW4 Switcher — New","description":"\u003ch2\u003eRadial SW4 4-Channel Switcher\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFour Channel Audio Switcher \u003c\/strong\u003eThe Radial SW4 is a four channel balanced audio switcher designed to connect to multiple mixing consoles or wireless systems, providing greater operational flexibility or backup capabilities in a live performance or concert setting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSilent console switching \u003c\/strong\u003eThe SW4 allows you to connect two mixing consoles to the same set of outputs, perfect for festivals or venues that switch from one console to another between acts. Each of the four channels features XLR inputs and transformer-isolated outputs to eliminate hum and buzz from ground loops, and they can be linked together to switch simultaneously. Channel-1 has a A+B mix function that sums both inputs together - allowing a wireless mic for the MC to be always active, while PFL switches and headphone outputs allow a technician to monitor any channel to ensure seamless playback. Since individual channels can be switched on their own, the SW4 can also be used to switch multiple wireless systems, playback devices, or any balanced audio sources.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwitching between wireless systems \u003c\/strong\u003eThe SW4 is great for switching between two or more wireless systems. Use it for backup or to enhance the show without taking up more audio channels. Can also be used on wireless guitars!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwitching between stereo sources \u003c\/strong\u003eUse the SW4 as a safety backup to switch between two digital playback systems. Connect the left channels to input-1 and the right channels to input-2. Link them together for stereo switching.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eToggling between two consoles\u003c\/strong\u003eWith four channels, you can instantly switch left, right, front down fill and subs with a push button. The SW4 gives you +20dB of signal handling to handle high output systems.\u003c\/p\u003e\n\u003cp\u003eSwitch up to 4 sets of wireless systems.\u003c\/p\u003e\n\u003cp\u003eLink channels for stereo or quad switching.\u003c\/p\u003e\n\u003cp\u003eToggle between two consoles at festivals.\u003c\/p\u003e\n\u003cp\u003eTransformer isolated to eliminate noise.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOn: Activates or mutes the channel. LED indicator illuminates when on.\u003c\/li\u003e\n\u003cli\u003eBus: Sends output to the master bus. Recessed to prevent accidental switching.\u003c\/li\u003e\n\u003cli\u003eA + B (on A only): Mixes inputs A and B together using a resistive summing mixer, reducing output by 3dB.\u003c\/li\u003e\n\u003cli\u003eTrim: Separate him controls are used to match the signal coming into the A and B inputs. Recesssed to prevent accidental change.\u003c\/li\u003e\n\u003cli\u003eAB: Selects active rear-panel input. Yellow LED indicates input A, orange LED for B.\u003c\/li\u003e\n\u003cli\u003ePFL: Pre fade listen lets you select between the A or B sources. When set to off, the headphones receive the master bus output.\u003c\/li\u003e\n\u003cli\u003eSignal: Signal presence LED indicator lets you know the signal is being received by the SW4.\u003c\/li\u003e\n\u003cli\u003eOn: Activates or mutes the master bus outputs.\u003c\/li\u003e\n\u003cli\u003eBus Out: Level control used to adjust the output of the master bus outputs.\u003c\/li\u003e\n\u003cli\u003eMute LED: Works with optional JR2 remote control, turns off all outputs except the headphone and tuner out.\u003c\/li\u003e\n\u003cli\u003ePhones: Headphone level adjust, may be set to stereo or mono depending on your application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudio circuit type: Passive Transformer Coupled with Relay Switching\u003c\/li\u003e\n\u003cli\u003eTransformer: Eclipse ET-LD2 line output\u003c\/li\u003e\n\u003cli\u003eNumber of channels: 4 x AB select\u003c\/li\u003e\n\u003cli\u003eFrequency response: 10Hz to 40Khz\u003c\/li\u003e\n\u003cli\u003eDynamic range: 136dB\u003c\/li\u003e\n\u003cli\u003eGain: -0.26dB with 10k Ohm load, -2.3dB with 600 Ohm load (Channel to Channel gain), + 8dB with 10k Ohm load (Channel to Bus gain)\u003c\/li\u003e\n\u003cli\u003eTotal harmonic distortion: 0.002%\u003c\/li\u003e\n\u003cli\u003eIntermodulation Distortion: 0.01%\u003c\/li\u003e\n\u003cli\u003ePhase Deviation: \u0026lt;3? at all frequencies\u003c\/li\u003e\n\u003cli\u003eInput Impedance: Load impedance in parallel with 10K\u003c\/li\u003e\n\u003cli\u003eOutput Impedance: 160 Ohms (Channel), 500 Ohms (Bus)\u003c\/li\u003e\n\u003cli\u003eMaximum Input: +26dBu (Channel to Channel), +17dBu (Channel to Bus)\u003c\/li\u003e\n\u003cli\u003eInput pad,Ground lift\u003c\/li\u003e\n\u003cli\u003eInput Connectors: XLR female\u003c\/li\u003e\n\u003cli\u003eOutput Connectors: XLR male, º\" guitar\u003c\/li\u003e\n\u003cli\u003eExtras: Bus output: stereo or mono assignable\u003c\/li\u003e\n\u003cli\u003eConstruction: 14 gauge steel chassis \u0026amp; outer shell\u003c\/li\u003e\n\u003cli\u003eSize (L x W x D): 17.5\" x 6\" x 1.75\" (445mm x 152.5mm x 44.5mm)\u003c\/li\u003e\n\u003cli\u003eShipping size (L x W x D): 22\" x 10.375\" x 4.5\" (559mm x 264mm x 114mm)\u003c\/li\u003e\n\u003cli\u003ePower: External 100V - 240V AC with 48V Phantom\u003c\/li\u003e\n\u003cli\u003eConditions: For use in dry locations only between 5?C and 40?C\u003c\/li\u003e\n\u003cli\u003eWarranty: Radial 3-year, transferable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":48198343360596,"sku":"SW4","price":959.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/2757\/2308\/files\/SW4.jpg?v=1794612535","url":"https:\/\/voltrivoo.myshopify.com\/products\/radial-sw4-switcher-new","provider":"VOLTRIVOO","version":"1.0","type":"link"}