Robe Tetra1 Linear Bar

TETRA1 is a linear bar built on the highly successful Spiider and Tarrantula technology. Despite its shorter length, TETRA1 maintains the same features, quality and pixel spacing as TETRA2.

Features:

• Light source - 9x 40W RGBW LED multichips
• Light output - 5.300 lm (integrating sphere)
• Zoom range - 4° - 45°
• Effects - 1x MCFE™ Multi-coloured Flower Effects (patented), Seamless Curtain of Light, Fast Paced Sweeping

Specifications:

• Source:
  • Light source type: 9x 40W RGBW LED multichips
  • LED life expectancy: min. 50.000 hours
  • Typical lumen maintenance: L70/B50 @ 50.000 hours
• Optical System:
  • Robe’s proprietary optical design
  • Zoom range: 4°- 45°
  • High efficient component optics
  • Fixture total lumen output:
    • 5.300 lm (integrating sphere)
    • 4.225 lm (goniophotometer)
• Dynamic Effects and Features:
  • Colour mixing mode RGBW or CMY
  • Individual control of each RGBW pixel
  • Variable CCT: 2.700K - 8.000K
  • Tungsten lamp effect: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for whites from 2.700K to 4.200K (red shift and thermal delay)
  • DataSwatch™ filters: pre-programmed 237 colours and tones including most used whites 2.700K, 3.200K, 4.200K, 5.600K and 8.000K
  • Pre-programmed pixel effects with colour, dimming and strobe chases, waves and pulses at variable speed and direction
  • 1x MCFE™ - Multi-Coloured Flower Effects – creating spectacular multicolour beam effects in the air rotating in both directions at variable speed (patented)
  • Motorized zoom
  • Pre-programmed random strobe & pulse effects
  • Electronic strobe effect with variable speed up to 20 Hz
  • High resolution electronic dimming: 0 - 100%
  • L3™ - (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black
• Control and programming:
  • Setting & Addressing: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, stand-alone operation with 3 editable programs (each up to 88 steps), built-in analyser for easy fault finding
  • Protocols: USITT DMX-512, RDM, Art-Net, MA Net, MA Net2, sACN, Kling-Net
  • REAP™ - Robe Ethernet Access Portal
  • Wireless CRMX™ technology from Lumen Radio - on request
  • DMX Protocol modes: 6
  • Control channels: 25, 45, 59, 68, 72, 81
  • RGBW / CMY: 8 or 16 bit
  • Zoom: 8 or 16 bit
  • Dimmer: 8 or 16 bit (internal 18 bit)
• Movement:
  • Tilt movement: 191°
  • 16 bit movement resolution
  • Controllable speed of Tilt movement
• Thermal specification:
  • Maximum ambient temperature: 40°C (104°F)
  • Maximum surface temperature: 70°C (158°F)
  • Minimum operating temperature: -5°C (23°F)
  • Total heat dissipation: max. 1023 BTU/h (calculated)
• Electrical specification and connections:
  • Power supply: Electronic auto-ranging
  • Input voltage range: 100-240 V, 50/60 Hz
  • Power consumption: max. 300 W
  • Power in/out connector: Neutrik powerCON TRUE1 in/out
  • DMX and RDM data in/out: Locking 5-pin XLR
  • Ethernet port in/out: RJ45
  • Embedded Ethernet switch 10/100 Mbps
• Mechanical specification:
  • Height: 279 mm (10.98") - head in vertical position
  • Width: 508 mm (20”)
  • Depth: 192 mm (7.56") - head in horizontal position
  • Weight: 11.3 kg (24.9 lbs)
  • Ingress protection rating: IP20
• Rigging:
  • Mounting points: 2 pairs of 1/4-turn locking points
  • 2x Omega adaptors with 1/4-turn quick locks
  • Universal operating position
  • Safety cable attachment point